We are the distributor of STEEL CITY, the best electrical Conduit Fittings & Accessories.
 
 
Untitled Document
Conduit Fittings & Accessories


** NPT standard ANSI C80.1 **
 

Handy Box
Application: Support wiring device single gang
Features: Space save, strong, and easy installation
Material: Mild steel 1.0mm, 1.2mm
Standard Finished : Electro galvanized

Handy Cover
Material: Zinc Sheet
Size: 2"x4"

Sqaure box
Application: Support wiring device double gang
Features: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized

Sqaure cover
Material: Zinc sheet
Size: 4"x4"

Surface cover for Sqaure box
Material: Zinc sheet
Size: 4-1/8" x 4-18" x 3/16"

Europa box
Application: Support wiring device single gang
Feature: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized

Octagon box
Application: Support 4 ways wiring junction
Feature: Space save, strong, and easy obtained by setting box in desire position
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized

Octagon cover
Material: Zinc sheet 0.55mm
Size: 4-1/6"

M.K. box
Application: Support British wiring device
Feature: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized

One for all Sqaure box
Application: Support all brand wiring double gang
Feature: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized

Stainless cover for German receptacle
Cat.,No FYD1121
Application: Provide for German double receptacle. Central bland areas for fittings on double receptacle (Matsushita device type WZ1121-7)
Material: Stainless sheet 0.7mm
Size: 4-3/4" x 4-3/4 x 1/4"
Screw: M6 x 3.2mm.
Weight: 87g.

Pull box
Application: Provide for use junction very size of conduit & conductor
Features: Are boxes without knockout, strong, and easy installations
Materail: steel 1.0mm.
Standard Finished: Gray enamel

Reducing washer
Application: For clampling ground lead cable to support flat metal surface. Requires only wrench for installation.
Features: Strong and smoothly bushed use's easy installation
Material: Steel 0.4mm

Junction box
Application: Junction raceway, dust tight and rain tight
Features: Finished with surface cover and "O" ring rubber seal. Index Protection 43 (IP43)
Material: Aluminium alloy

L.B.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy

L.L
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy

L.R.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy

O.C.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy

O.T.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy

T.B.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy

F.S. box Single gang
Application: Support wiring device every brand surface mounting
Features: Strong and graceful, easy installations
Material: Aluminium alloy
Screw: M4 x 10mm.

F.S. cover for Single gang
Size: 2-3/4" x 4-1/2"

F.S. box Double gang
Application: Support wiring device every brand surface mounting
Features: Strong and graceful, easy installations
Material: Aluminium alloy
Screw: M4 x 10mm. (2ea./box)

F.S. cover for Double gang
Size: 4-1/2" x 4-1/2"

Wide series F.S. box
Application: Support 1-3 device "National" Full color, wide series
Features: Strong and graceful, easy installations
Material: Aluminium alloy
Screw: M4 x 10mm.(2ea.box)

Full color F.S. box
Application: Support 1-3 device National, Toshiba, Meikosha. Wiring device every brand surface mounting
Features: Stong, graceful, and easy installation
Material: Alluminium alloy
Screw: M4 x 10mm.(2ea.)
Standard finished: Blasting

F.S. box 3"x5"
Application: Support 1-3 device National, Toshiba, Meikosha. Wiring device every brand surface mounting
Features: Strong and graceful, easy installations
Material: Alluminium alloy

Service entrance cap
Application: Type clamp provide for use EMT conduit. Type Treaded provide for IMC conduit. Two screws provided for securing the head to the conduit. No need for beading conduit
Features: Cast of high strength aluminium alloy. Long overhang on cap and positive seating of entrance head on conduit means no moisture can enter. Can be installed in either horizontal or vertical position
Material: Aluminium alloy

Outlet box for Ball flange
Application: Act as ceiling or wall mounting for lighting fixtures
Features: Strong and graceful, easy installations
Material: Alluminium alloy

Ball flange
Application: For use with outlet box. Flexible hanger lighting fixture. Adjust ball to require position
Features: Strong and graceful, easy installations
Material: Alluminium alloy

Threaded tubulet reducer
Application:

For reducing the opening in tubelet hubs or any female threaded fitting and smoothly bushed

Material: Zinc alloy (Cat.,No. RN21 ~ RN32)
Aluminium alloy (Cat.,No RN41 ~ RNCB)

Close up plug
Application:

Close up plugs are used in NPT threaded, for closed the opening in tubelet ubs or any conduit outle box.

Material: P.V.C (Cat.,no. CUP21~CUP26)
Aluminium alloy (Cat.,No CU21~CU32)

Rain tight hub connector
Application:

For I.M.C & R.S.C. conduit rain tight hub connectors are provided the same tight seal against water, dust and any bugs

Material: Body - Zinc alloy
Locknut - Mild steel
O ring - P.V.C

Chase Nipple
Application:

For I.M.C. & R.S.C. conduit, Chase nipples are connector conduit to outlet or other box. Permit box to be removed later without disturbing conduit.

Material: Body: Zinc alloy

Electro Galvanized Nipple
Application:

Use to connect conduit to conduit or conduit to outlet box

Features: Clean threads for easy installations
Material: Steel pipe
Standard Finished: Electro galvanized

Flexible conduit
Application:

Rounded channel-iron shape provides strength and make fitting easy over the roller-bearing surfaces. Spring action of the cold-rolled steel holds a ture circular cross section under any bend

Features: Light weight, easy installations
Finished: Zinc steel strip

Liquid tight flexible conduit
Size: 1/2"~4"

Flexible connector
Application:

Use to connect flexible metal conduit to any outletboxes

Features: Insert may be easily removed. Connector has threaded end and is supplied with locknut
Material: Zinc alloy

Liquid tight flexible connector
Application:

Connection on double end of liquid tight flexible conduit. Connectors are provide the same tight seal against water, oil coolants, vapor and dust. The same sure girp and easy installations

Features: Strong and easy installation
Material: Zinc alloy, P.V.C

E.M.T. Conduit & Elbow
Application:

Use to connect EMT conduit to EMT conduit when require bended diection of raceway

Features: Provide 45 and 90 degree for selection, and easy installation
Materail: Steel pipe
Standard finished: Electro galvanized and Stove-enamel coating

E.M.T Bender
Application:

Use for bended EMT conduit to requirement degree. Provide marking 30, 45, 60, 90 degree

Features: Strong and easy bended to require
Material: Cast Iron
Standard Finished: Electro galvanized

I.M.C Conduit & Elbow
Application:

Use to connect IMC conduit to IMC conduit when require bended direction of raceway

Features: Provide 45 and 90 degree for selection, and easy installation
Material: Steel pipe
Standard Finished: Electro galvanized and Stove-enamel coating

I.M.C Hickey
Application:

Use for bended EMT conduit to requirement degree. Provide marking 30, 45, 60, 90 degree

Features: Strong and easy bended to require
Material: Cast Iron
Standard Finished: Electro galvanized

Electrical Wire Pulling Lubricant
Cat.,No WP00

E.M.T connector
Application:

Use to connector E.M.T. conduit to any outlet box

Features: Strong and easy installations
Material: Zinc alloy

E.M.T connector (Mild steel)
Application:

Use to connector E.M.T. conduit to any outlet box

Features: Strong and easy installations
Material: Mild steel 1.6mm (Size 1/2"~1")
Mild steel 2.0mm (Size 1-1/4"~2")
Standard Finished: Electro galvanized
Reference Standard ANSI/NFPA70

Rain tight E.M.T conduit
Application:

Use to connector E.M.T. conduit to any outlet box

Features: Rain-tight, concrete-tight, strongand easy installations
Material: Zinc alloy

Rain tight E.M.T connector (Mild steel)
Application:

Use to connector E.M.T. conduit to any outlet box

Material: Mild steel
Finished: Electro galvanized

E.M.T coupling
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Features: Strong and easy installations
Material: Zinc alloy

E.M.T coupling (Mild steel)
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Features: Strong and easy installations
Material:

Mild steel 1.6 mm (Size 1/2"~1")
Mild steel 2.0 mm (Siz 1-1/4"~2")

Reference standard: ANSI/INFPA 70

Rain tight E.M.T Coupling
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Features: Rain-tight, concrete-tight, strong and easy
Material:

Zinc alloy


Rain tight E.M.T coupling (Mild steel)
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Material: Mild steel
Standard Finished:

Electro galvanized


E.M.T strap
Material: Mild steel
Standard Finished:

Electro galvanized


Locknut
Material: Mild steel
Standard finished:

Electro galvanized


Bushing
Application: Tighten the end of connector I.M.C./R.S.C. conduit, nipple, chase nipple and any male fittings.
Features:

Product conductor

Material: Zinc alloy, Polypropylene (P.P.)

I.M.C coupling
Material: Steel pipe
Standard finished: Electro galvanized

Ericson coupling
Size: 1/2"~4"

I.M.C strap
Material: Mild steel
Standard Finished:

Electro galvanized


Stainless strap
Size: 1/2"~4"

N.M. connector
Material: Zinc Alloy

Liquid tight cable connector
Application: Snap flexible conduit such as VCT, NYY, through hole of any box
Features: Provide straight, 45 degree, 90 degree for selection, easy installation
Material: Zinc alloy, P.V.C., Rubber

Wire nut

Drop wire clamp
Cat.,No: DW00
Application: Preformed dead-end outdoor telephone drop wire
Features: Strong, Easy install
Material:

Body: PVC
Handle: Steel wire 2.65mm.

Weight: 39g.

Stud thread rud
Application: Fasten in ceiling by anchor to hold conduit, wireway, etc
Material:

Iron shaft

Standard Finished: Electro Galvanized

Hexagon coupling
Application: To prolong the stud thread rod
Material:

Iron shaft

Standard finished : Electro galvanized

Hexagon nut
Application: To fasten the end of Hexagon coupling
Material:

Steel nut

Standard finished: Electro galvanized

C chanel
Application: To support conduit fitting on wall, ceiling, etc. Support various size conduit
Features:

Easy installations, strong

Standard Finished: Galvanized steel 1.4 mm.

Conduit clamp
Application: Snap conduit that place on C-channel. Fasten by screw
Features:

Easy installations, Strong

Material: Mild steel
Thickness:

1.0 mm. (size 1/2"~1")
1.5 mm. (size 1-1/4"~4")
2.0 mm. (size 5"~6")

Standard Finished: Electro galvanized

Beam clamp
Application: Support conduit that need fit on metal building structure. Such as angle steel, U-Channel
Features:

Easy installations, unneed to drill, weld.

Material: Mild steel
Standard Finished: Electro galvanized

Applicable Hanger
Application: Snap conduit fasten on beam clamp
Features:

Easy installations

Material: Mild steel
Standard Finished: Electro galvanized

Stainless C chanel
Application: To support conduit fitting on wall ceiling etc. Support various size conduit
Features:

Easy installations, Strong

Material: Stainless steel

Stainless counduit clamp
Application: Snap conduit that place on C-channel. Fasten by screw
Features:

Easy installations, Strong.

Material:

1.0 mm. (size 1/2"~1")
1.5 mm (size 1-1/4"~4")
2.0 mm (size 5"~6")

Finished: Electro Galvanized

Stainless beam clamp
Application: Support conduit that need fit on metal building structure. Such as angle steel, U-channel, H-beam, I-beam
Features:

Easy installations, unnneed to drill, weld.

Material:

Stainless steel 2 mm.

Weight:

70 g.

Cat.,no TBC01

Stainless applicable hanger
Application: Snap conduit fasten on beam clamp
Features:

Easy installations

Material Stainless steel

Floor Outlet Square Box 4"x4"(National)
Application: Flush mounting on floor, support National various type receptacle, as shown on below
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm

Floor outlet Square Box 4"x4" (Bticino)
Application: Flush mounting on floor, support bticino various type receptacle, as shown on below
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm

Floor outlet Square Box 4"x4" (8 ports UTP)
Application: Flush mounting on floor, support 8 ports UTP socket
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm

Floor Outlet Cup (Support Eagle#817)
Application: Flush mounting on floor, support Eagle#817 receptacle
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, super market etc

Material:

Front plate: Brass
Cup: Aluminium Alloy
Close-up plug: PVC
Screw: Stainless screw

Weight: 800 g.
Cat.,No: FP817B

Floor outlet Square Box 5"x5"
Application: Flush mounting on floor. Support "National" Wide series WEG 15xxx verious type duplex receptacle
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm

Jumbo Square Box For Floor outlet Square Box 5"x5"
Application: Support floor outlet 5"x5". Support 3/4" x 1" conduit
Features:

Easy installation, strong, space

Dimension:

Size: 5"x5"x2"
Knockout: 3/4", 1", 3/4"
Material: Mild steel 1.2 mm

Material: Mild steel 1.2 mm
Standard Finished: Electro Galvanized
Weight: 300 g.
Cat.,No: FPBXJ

U clamp 2 screw
Application: Connection copper conductor. Main & Main, or Main & Tap
Features: Fasten bolt with wrench
Material: brass
Bolt: Steel bolt/ Spring washer

Terminal lug
Application: Terminate end of conductor to pole of switch, load center
Material: High purity copper
Finished: Blasting

Ground Rod Copper Electrolyed Type
Application: Connection electrical applicance body with ground conductor to the end of ground rod.
Material: Steel Shaft
Finished: Copper Electrolyed

Ground Rod Sectional Type (Threaded 2 End)
Application: Sectional ground rod are designed to meet the requirements for deep, dependable, low resistance grounds.
Material: Steel Shaft
Finished: Copper Electrolyed

Ground rod coupling
Cat.,No GRP71
Application: For couple sectional type ground rod.
Material: Brass
Finished: Copper Electrolyed
Weight: 110 g.

Ground Rod Copper Clad Type
Application: Use for lightning protection system.
Features: Drive ground rod down at earth, welding lightning conductor at the end of ground rod.
Material: Steel shaft
Finished: Copper Clad

Ground Rod Hot Dip Galvanized Type
Application: Connection electrical applicance body with ground conductor to he end of ground rod.
Material: Steel shaft
Finished: Hot Dip galvanized

Ellipse Ground Clamp
Application: Ellipse ground clamp affords quick and easy connection of ground wires to ground rod. Only one piece to handle, it is a complete unit assembly thus preventing possible loss of part.
Material: Brass
Finished: Blasting

Copper ground clamp
Catl., No: GR73
Application: Copper ground clamp is used for connecting the ground bus, either parallel to, or at right angles to rod or pipe. Easily installed, the connection is completed by merely tightening
Features: The connection is completed by merely tightening the two nuts on the U-bolt, nuts and lockwashers, permit entire connection to be buried in the ground without danger of corrosion
Material: High Purity Copper, Stainless Shaft
Finished: Blasting
Weight: 400 g.

3 Groove Ground Clamp
Application: Ground Clamp for three conductor is used for connecting the ground bus, either parallel to, or at right angles to rod or pipe. Easily nstalled, the connection is completed by merely tightening
Features: The connection is completed by merely tightening the two nuts on the U-bolt, nuts and lockwashers, permit entire connection to be buried in the ground wihout danger of corrosion
Material: Body - Copper Alloy
Bolt&Nut: Bronze
finished: Blasting
Weight: 520 g.
Cat., No GR74

Saddle Wall Clamp
Application: For Snap bare copper wire install on wall, ceiling.
Material: High Purity Copper
Finished: Blasting
Screw Stainless M6 x 15

Cross cable square clamp
Cat.,No: GR85
Application: For snap double bare copper wire 25, 35, 50 sqmm cross junction.
Size: 2"x2"x1-1/8"
Material: High Purity Copper
Finished: Blasting
Screw Stainless M6 x 15
Weight: 314 g

Round Base Tower Saddle Clamp
Cat.,No: GR84
Application: For snap 50, 70, 95 sqmm bare copper wire install on wall, ceiling
Material: High Purity Copper
Finished: Blasting
Screw Stainless M6 x 20
Weight: 557 g

T Clamp
Cat.,No: GR86
Application: For snap double bare copper wire 25, 35, 50 sqmm T-junction
Material: High Purity Copper
Finished: Blasting
Screw Stainless M8 x 30
Washer & Spring: Stainless
Weight: 134 g

Nickel Plated Copper Split-Bolt
Application: Connection various size copper conductor, Main&Main, Main&Tap.
Features: Nickel plated for increase conduction electrical current
Material: Copper alloy
finished: Nickel plated

Bus bare clamp
Cat.,No GR91
Application: For snap bus bare 3x25 mm. Install on wall, ceiling.
Size: 19x55 mm.
Material: High Purity Copper
Finished: Blasting
Screw: Stainless M6x15
Weight: 96g.

Cross bus bare clamp
Cat.,No GR92
Application: For snap double 3x25 mm. copper busbare. Cross junction
Size: 57x57x16 mm.
Material: High Purity Copper
Finished: Blasting
Screw: Stainless M6x15
Weight: 313 g.

Connector dead end
Application: For keep the end of single aluminium condutor safety.
Features: Strong, Unbroken
Material: Aluminium alloy
Screw: Steel bolt

Parallel groove clamp
Application: Connection various size aluminium conductor in the pararell groove, Main & Main, Main & Tap
Features: Strong, Unbroken
Material: Aluminium alloy
Screw: Steel bolt

Mesh parallel groove clamp
Cat.,No PG14
Application: Connector various size ACSR conductor in the pararell groove. Main&Main, Main tap 50, 70, 95, 120, 185 sqmm
Features: Strong, Unbroken
Material: Aluminium alloy
Screw: Steel bolt
Weight: 525 g
 
Home | About us | Products | Project References | Contact us

 

All materials © T.L.S Engineering Co., Ltd. 2014.

No materials from all this site may be copied, distributed or in any way used without the expressed prior permission of T.L.S Engineering Co., Ltd

 
eXTReMe Tracker
Lightning Protection Fitting & Accessories - Click to view more products Electrical Conduit & Wire Fitting - Click to view more products Hot Dip Galvanized Conduit Fitting & Accessories - Click to view more products Explosion Proof Conduit Fittings & Accessories - Click to view more products